How Often To Use Remington Ilight

two Year WARRANTY
IPL3500AU

THE SKIN Nautical chart

Warning: i-Lite® is not suitable for very nighttime or black skin, white/ grey or very light blonde/cerise hair.
FOR FACIAL Apply: Only suitable for female person facial use below the cheekbone.
DO Not employ on or around the eyes, eyebrows or eyelashes. Doing so can cause serious and permanent eye injury.
The Meaty Control IPL is a light-based device for permanent hair reduction designed for home employ. It is a powerful electrical device and should be used with special attention to condom. Be sure to read all warnings, contraindications and rubber precautions before utilize, and follow them strictly. We recommend you re-familiarise yourself with the instructions before each treatment.
INTENDED USE
The Remington Compact Control IPL is intended to remove unwanted hair and effect long-term, or permanent hair reduction. Permanent hair reduction is divers every bit a long-term stable reduction in the number of hairs regrowing after a treatment regime. You lot may use the Remington Meaty Command IPL to remove unwanted torso pilus. Platonic torso areas include the underarms, bikini line, arms, legs, confront (female facial utilize only), dorsum, shoulders and breast.

Important Safety INSTRUCTIONS

WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, Fire, OR INJURY TO PERSONS:

Use this appliance only for its intended use described in this manual.
Do not employ if information technology is damaged or malfunctions.
Do not exit the appliance unattended while plugged in.
Keep the ability plug and cord away from heated surfaces.
Do not use the production with a damaged cord.
Store the product at a temperature between -forty°C and seventy°C. The operating temperature is betwixt 10°C to 35°C.
Simply utilise the parts supplied with the appliance.
Do not twist or kink the cable and do not wrap it around the appliance.
The trunk of this apparatus is not washable or water-resistant. Practise not put the appliance in liquid; do non employ it most water in a bathtub, basin or another vessel; and do not apply information technology outdoors.
Make sure the ability cable and adaptor do not get wet. Do not reach for your unit if it has fallen into water – immediately unplug it from the electric outlet.
Do not plug or unplug the appliance with wet hands.
This appliance should not be used past anyone nether the historic period of 18 and persons with reduced physical, sensory or mental capabilities or lack of feel and knowledge unless they take been supervised/instructed and understand the hazards involved. Children shall not play with the apparatus. Cleaning and user maintenance shall non be made by persons under 18.
This appliance is not intended for commercial or salon use.
Possible hazardous optical radiation emitted from this product. Do non stare at the light source which may be harmful to the centre.

WARNINGS AND Safety INFORMATION

Before you kickoff using i-LIGHT®:
Be sure to read all Warnings and Safety Information. Before you lot begin, check to see if i-LIGHT® is suitable for you lot.
Use the skin and hair chart at the front end of this manual (page ii) and the integrated skin sensor to determine if this device is right for you.

For Facial Use: Merely suitable for female facial hair on the cheeks, sideburns, chin, neck and above the lips.
DO Not use on the eyes, eyebrows or eyelashes. Doing then can cause serious and permanent centre injury.

Pare Blazon

Practise Non use on very dark or blackness skin, equally information technology may outcome in burns, blisters and changes in skin color.
DO NOT use on tanned pare or later recent sun exposure, as it may cause burns or peel injury.
i-Lite® is non effective on naturally white, grey, blonde or cherry-red pilus.

AREAS Not TO Treat:

DO Not employ information technology on the scalp or ears.
Exercise Non use on male person face or neck.
DO Non utilize in a higher place the cheekbone (female person facial employ).
DO Not use on nipples, areola or genitals.
Do Not use if yous accept tattoos or permanent makeup in the surface area to exist treated.
DO NOT use on nighttime chocolate-brown or black spots such as moles, birthmarks or freckles.
DO NOT use on an area of recent surgery, deep pare, laser resurfacing, scars or skin that has been damaged with burns or scalds.

WHEN Not TO USE/WHEN TO AVOID USING I-LIGHT®

DO NOT use if you lot accept tanned skin in the intended treatment area, as your skin may be too nighttime and treatment in tanned areas could temporarily cause skin swelling, blisters, or could change the color of your skin. Wait until your tan has faded before treating.
DO NOT apply on peel with cosmetics applied, equally treating in those areas could temporarily cause skin swelling, blisters or could change the colour of your skin. Make sure to thoroughly clean the intended treatment area prior to use.
DO Not flash the aforementioned treatment spot multiple times during the same session, as this could temporarily cause skin swelling, blisters, or could alter the colour of your peel.
Do NOT treat any expanse more than than once every two weeks, every bit this volition not speed upwards results, merely could increase the likelihood of skin swelling, baking or changes to the colour of your peel.
Exercise NOT employ on damaged skin, including open up wounds, cold sores, sunburn or areas where you have had a peel skin or other skin resurfacing procedure inside the concluding 6-8 weeks.
Exercise Non use on irritated skin, including rashes or swollen skin. These weather tin brand the skin more sensitive. Wait for the afflicted area to heal before employ.
Do NOT apply if your skin is sensitive to calorie-free. In order to determine if you lot tin can use i-LIGHT®, perform a exam on a minor patch of pare and look 24 hours to make up one's mind if at that place are whatever adverse reactions earlier treating more broadly.
Practise Not use if you are or may exist pregnant or are breastfeeding. i-LIGHT® has not been tested on significant women. Hormonal changes are common during pregnancy and breastfeeding and could increment skin sensitivity and the risk of pare injury.
DO NOT flash against any textile other than skin.
DO Not use i-Calorie-free® for whatever purpose other than hair removal.
DO NOT treat whatsoever area where yous may anytime want your hair to grow back. The results may be permanent and irreversible.
DO Not use if taking a photosensitising medication or herbal remedy without seeking medical advice as the flash may damage the skin.
DO NOT use on the face if y'all accept a history of cold sores; use of IPL or any treatment that irritates skin tin can cause a recurrence of cold sores.

CAUTION: Avert treating areas that contain only vellus hairs (very thin, fine hair known as "peach fuzz") as this may result in undesired pilus re-growth.

If you've had professional or clinical or self-administered light amplification by stimulated emission of radiation or IPL or electrolysis pilus removal treatments, look at least 6 months earlier using i-LIGHT®. If you've waxed, plucked or epilated hair in the handling expanse, wait at least 6 weeks before using i-Low-cal®. The device uses the hair under your skin to disable your hair at the root, so it is not effective if the hair has been pulled out.
DO Non use directly over or near Active Implantable Medical Devices such as implantable pacemakers, internal defibrillators, or insulin devices. Although no problems associated with the apply of this device have been reported during clinical studies, it is recommended to observe all active implantable medical device warnings regarding the utilise of electronic devices to prevent any failure or break of an active implantable device.
Practice NOT use over or near annihilation artificial such as silicone implants, Implanon contraceptive implants, pacemakers, injectable fillers (eg. Botox), subcutaneous injection ports (insulin dispenser) or piercings.
DO NOT use over or about fillings or dental implants.
Wireless communications equipment may affect the i-Low-cal® device and should be kept at least iii.3m away.

i-LIGHT® Meaty CONTROL KEY FEATURES

PARTS

ane. Adapter Socket
ii. Energy Level Indicator Lights (v)
3. Control Button
iv. Ready Calorie-free
5. Treatment Window
6. Skin Tone Tester
7. Adapter (non shown)

GETTING STARTED

Be patient when first using your i-LIGHT® Meaty Control, every bit with any new product, it may have a little while to familiarise yourself with the product. Take the fourth dimension to acquaint yourself with your i-Lite® Compact Command as we are confident you volition receive years of enjoyable utilise and complete satisfaction.

GETTING ACQUAINTED WITH i-Light® Compact Command

The efficiency of hair reduction varies from person to person according to body area, pilus colour, and how the device is used. A typical full hair growth bicycle may take 18-24 months. During this time, multiple treatment sessions are required to achieve permanent hair reduction.
A typical hair reduction plan during a full hair growth wheel includes:

Treatments ane-6: Plan ii weeks autonomously.
Treatments 7-eight: Program four weeks autonomously.
Treatments 9+: Treat equally needed, until desired results are achieved.

EXPECTED TREATMENT OUTCOMES
The individual response depends on pilus type every bit well every bit biological factors that may impact hair growth patterns. Some users may respond quicker or slower than the average number of treatments.

Skin Type'	Body Hair^e	Area	Average Treatment Fourth dimension	Effectiveness of Hair Reduction
– I Five	Dark blonde to chocolate-brown	Lower/upper leg	Session 10 – 12 approx. 4 weeks autonomously	60%
		Arms		50%
		Bikini line		60%
		Underarms		55%

Peel Type'	Body Pilus^eastward	Surface area	Average Treatment Fourth dimension	Effectiveness of Hair Reduction
I – V	Brown to blackness	Lower/upper leg	Session 8 – 10 approx. 4 weeks autonomously	70%
		Arms		50%
		Bikini line		70%
		Underarms		65%

Pare types are based on the Fitzpatrick calibration of skin colours. Refer to the skin colour nautical chart at the front of this transmission (Fig 1).
Not constructive on white torso pilus.

ENERGY LEVELS
The free energy level determines the intensity of the light pulse delivered to your peel. Every bit the energy level increases, so do hair reduction results, besides as the risk of possible side effects and complications.
• The device has 5 levels of free energy from 1 (the lowest) to 5 (the highest), represented past 5 energy level indicator lights.
• When the device is turned on, the energy level is set to level 1 automatically. Simply one energy level indicator light will be on.
• To change the energy level, press the control button repeatedly to increase the energy level from i to 5. Once at level v, press the command button again to reduce the energy level from v back to ane.
• To determine the right energy level for your treatment area, refer to section BEFORE YOUR Get-go TREATMENT (pg. 11).
PULSING AND GLIDING
Pulsing is the best technique for working at higher energy levels. Printing the treatment window against your peel. Work in rows, either across or downwards. Kickoff at one terminate of each row and progress to the other end. The treatment window creates temporary pressure marks on the treated surface area then you can see areas you lot accept treated. Afterward each pulse, motion the treatment window to the next spot. Keep doing this pulsing action for the area you are treating. Avert gaps or overlaps as y'all use the device. Gliding is the best technique for working at lower energy levels. Printing the treatment window firmly against your skin and slowly glide over your skin, either across or down. Make certain that the treatment window is always touching your skin. At lower energy levels, the device takes only 1-one.5 seconds to recharge between pulses. This generates a nonstop sequence of flashes.
Glide at a speed so that you avert gaps or overlaps.
• Do not treat the aforementioned area of peel more than once per pilus reduction session.
• End apply immediately if you have whatever discomfort.
THE Pare TONE TESTER
Light-based hair reduction on darker skin tones may result in adverse furnishings such as burns, blisters and peel colour changes (hyper- or hypo-pigmentation). The built-in pare tone tester detects the colour of your skin automatically. The pare tone tester checks your peel colour at the starting time of, and occasionally during, each handling.
If your peel tone is also dark for safe use, the device will not operate, and the skin tone tester light will blink.
WHAT TO Expect DURING Utilize
For many people, using the device may exist their first experience with a light-based device. During a treatment session, it is normal to experience or feel:
• Noise: This is the cooling fan.
• Popping sounds: These occur with each flash.
• A sensation of warmth and tingling: During each light pulse.
• Some redness: It is non uncommon to run into some very mild, pink-like pare colouration during or just after handling.
This is unremarkably about noticeable effectually the hairs themselves.
• Stop use immediately if y'all see your pare is very ruby.
• Contact your md immediately, if you experience whatever complications.

USING YOUR DEVICE

BEFORE YOUR Starting time Treatment
• Remove all jewellery before utilize.
Yous must determine which free energy level is right for your peel and the area yous want to treat. The device has 5 levels of free energy from 1 (the lowest) to 5 (the highest). For instance, you might care for one area at free energy level 1, and another at level 4. For information on energy levels, refer to section Free energy LEVELS. To choose the correct free energy level, exam each handling surface area separately (refer to the skin color chart at the front of this transmission).

Press the control button to turn on the device. The level 1 energy level indicator low-cal will come up on.
Identify the treatment window on your skin to evangelize one pulse. If y'all practice non experience aberrant discomfort press the control button once more. This will increase the energy level. Deliver 1 pulse on a different spot at energy level ii.
Continue testing at increased energy levels. If you lot do not experience any adverse effects within 24 hours, y'all tin offset the total treatment at that free energy level.

• Use a lower energy level if you experience any discomfort. Repeat this test for each part of the torso you wish to treat.

You lot ARE NOW READY TO Apply YOUR DEVICE

Before treating an surface area, the skin should be shaved, make clean, dry and free of any powders, antiperspirants, deodorants or moisturisers. Do not wax, pluck or tweeze the hair out.
Printing the control button. The device will turn on, the level 1 energy indicator low-cal will exist on, and a fan sound volition get-go.
Approximately 1 second subsequently pressing the control button, the ready low-cal will plough on. The device is then ready to use at the lowest energy level.
Set the energy level past pressing the command button repeatedly to increment the free energy level until you take the level you want. The energy level indicator lights betoken the chosen setting (refer to section Free energy LEVELS).
Decide if y'all wish to treat the area by Gliding or Pulsing (refer to section PULSING AND GLIDING).
Employ the treatment window to the pare. Make sure that the pare is spread evenly and smoothly. When the treatment window is in full contact with the peel, the prepare light will start blinking slowly.
The device will first decide the colour of your peel automatically and it volition wink a pulse of lite onto your pare. You lot will feel a mild sensation of
warmth and tingling, and you may hear a popping sound.
• If you are pulsing, remove the device from your peel. The device will immediately recharge for the next pulse. After a few seconds (depending on the energy level) the ready calorie-free volition turn on once more, and starting time blinking slowly when pressed against the peel.
• If y'all are pulsing, echo the process. If you are gliding, simply continue. Continue to pulse or glide until you have treated the area fully.
• Finish use immediately if your pare blisters or burns.

AFTER Treatment
When you have finished your handling session:
1. Turn the device off past giving the command button an extended press. Remember the last energy level setting you used because it will not be restored when you turn the device on again.
2. Remove the adapter from the electrical outlet.

CLEANING YOUR i-Lite® Compact Control DEVICE

Caution: Before cleaning your i-LIGHT® Compact Control, make certain that the device is switched OFF and the power cord is asunder from the device.

Regular cleaning helps to ensure optimal results and long life.
To clean the wink window, use a dry clean cloth. Take intendance non to scratch or flake the flash window. Scratches and chips can reduce the effectiveness of the unit.
Use a small hand-held vacuum to remove dust and debris from the handpiece vents.
Warning: If the wink window is cracked or broken, the unit of measurement must not exist used. Never scratch the filter glass or the metallic surface inside the treatment caput.
Caution: The i-Low-cal® is a high voltage device. Never immerse in h2o. Never clean the unit or whatever of its parts nether a tap or in a dishwasher.

STORAGE

Switch the unit off, unplug and let to cool for ten minutes earlier storage.
Store the unit in a dry place at a temperature between -40°C and 70°C.

TROUBLESHOOTING

Always read these instructions fully before using i-LIGHT® Meaty Control.
Refer to this troubleshooting guide if you experience whatsoever issues with i-Light® Meaty Command, as this department addresses the most common problems y'all could meet. If you have followed the instructions in this section and keep to experience bug, please contact the Remington® Service Centre for farther assistance.

My device does not start.

Make sure the adapter is properly continued to the device and that information technology is plugged into an electrical outlet on the wall.

There is no light pulse when the device touches my pare.

Check that the device is continued and the ready low-cal is on. Make certain that the treatment window is evenly and firmly pressed to the pare and that you are moving the device across your peel. It is also possible that your skin colour is too dark.

The skin tone tester light and the gear up light blink.

The skin colour is as well dark.

1 or more lights blink.

The device has malfunctioned.

The device has stopped working and is in standby mode.

Press the command push button again to start the device.

Oftentimes ASKED QUESTIONS

Q. What areas of my trunk can I treat with i-Lite® Compact Control?
A. i-Lite® Compact Control is designed for unisex utilize on areas beneath the cervix, including the legs, underarms, bikini line, arms, chest and back. Females tin too employ on facial hair below the cheekbone.
Q. What are the risks involved with i-LIGHT® Compact Control. Is it safe?
A. i-Calorie-free® Compact Control is clinically proven to be safe and constructive, merely similar whatsoever electronic device, it is of import that you read the operating instructions and safe warnings.
Q. Is IPL dangerous for the peel after long term utilize?
A. There have not been any reported side furnishings or skin harm from long term utilize of intense pulse lite (IPL).
Q. Why is my hair growing despite treatments?
A. Results aren't immediate, and individual results vary. Most users will begin to notice fewer hairs within one-2 weeks after beginning handling. During this fourth dimension information technology may expect similar the pilus is still growing, but information technology is actually existence 'pushed out'. Pilus grows in a wheel of 3 dissimilar phases which lasts 18-24 months. Only hairs in the agile growth phase are susceptible to treatment, which is why multiple treatments are required for optimal results. Another reason for continued growth could be that the area was missed during handling. Repeat the treatment regime when you discover regrowth.
Q. Why can't I use i-Light® Compact Control later recent sun exposure?
A. Lord's day exposure causes high levels of melanin to be present and exposes the skin to a college risk of burns or blisters post-obit treatment.
Q. Do I need eye protection while using i-LIGHT® Meaty Command?
A. No, information technology is not harmful to the eyes. i-Calorie-free® Compact Command features a prophylactic system that prevents unintentional flashing when the device is not in contact with the skin. The small amount of low-cal emitted during treatment is similar to that of a camera flash and is not harmful to the eyes.
The peculiarly designed handling caps minimise lite leakage. If the reflected light is unpleasant, you may want to shut your eyes before each flash.

ENVIRONMENTAL PROTECTION

In the event that y'all demand to dispose of your i-LIGHT® device, to ensure proper disposal of the product, please take the appliance to a recycling centre, where the battery should exist removed past a professional and recycled separately. For more data about recycling electrical and battery-operated appliances, delight contact your local council role or your household waste material disposal service.

SERVICE AND GUARANTEE

Defects affecting production functionality appearing within the guarantee catamenia will exist corrected by replacement or repair at our discretion provided the production is used and maintained in accordance with the instructions.
Defects from repair past an unauthorised dealer are not covered.
Consumables are excluded.
Your statutory rights are not affected.
If you phone call the Service Centre, please accept the Model No. on paw, every bit nosotros won't exist able to assist you without it. Model No. can be found on the rating plate of the appliance.
Replacement accessories are available to purchase through your Remington® Service Eye.

TECHNICAL INFORMATION

Technology	Intense Pulsed Light
Spot Size	0.9cm ten 3cm (2.7cm²)
Maximum Free energy Level	4J/cm²
Pulse Duration	0.00056 Sec

Spectrum Brands Australia Pty Ltd and Spectrum Brands New Zealand Limited
WARRANTY Confronting DEFECTS

In this warranty:
Australian Consumer Law means the Australian consumer law set out in Schedule 2 to the Contest and Consumer Act 2010;
CGA means the New Zealand Consumer Guarantees Deed 1993;
Appurtenances mean the product or equipment which was accompanied past this warranty and purchased in Australia or New Zealand, as the case may exist; Manufacturer, We or united states of america ways:
1. for Goods purchased in Australia, Spectrum Brands Commonwealth of australia Pty Ltd ACN, 007 070 573; or
two. for Goods purchased in New Zealand, Spectrum Brands New Zealand Express, as the case may exist, contact details as set out at the stop of this warranty; Supplier ways the authorised benefactor or retailer of the Appurtenances that sold yous the Goods in Australia or in New Zealand; and
Yous hateful you, the original terminate-user purchaser of the Goods.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law, or the CGA. You lot are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to exist of acceptable quality and the failure does not corporeality to a major failure.
The benefits provided by this Warranty are in add-on to all other rights and remedies in respect of the Goods which the consumer has under either the Australian Consumer Police force or the CGA. The original purchaser of the Goods is provided with the post-obit Warranty subject to the Warranty Conditions:
We warrant the Goods for all parts defective in workmanship or materials for the period of two (2) years from the date of purchase (Warranty Menses). If the Appurtenances evidence defective inside the Warranty Period by reason of improper workmanship or material, we may, at our ain discretion, repair or replace the Goods without accuse.
Warranty Conditions
The Goods must exist used in accordance with the manufacturer's instructions. This Warranty does not apply should the defect in or failure of the Goods be owing to misuse, abuse, accident or non-observance of manufacturer's instructions on the function of the user. As far as the law permits, the manufacturer does not accept liability for any straight or consequential loss, damage or other expense caused by or arising out of whatever failure to apply the Goods in accordance with the manufacturer'southward instructions.
Exhaustible components (such equally shaver heads, cutters and foils) of the Goods are included under this Warranty simply where there is a defect in workmanship or materials used.
The warranty granted nether clause 3 is limited to repair or replacement only.
Any parts of the Goods replaced during repairs or any product replaced remain the property of the manufacturer. In the outcome of the Appurtenances being replaced during the Warranty Period, the warranty on the replacement Goods will expire on the same date as for the Warranty Period on the original Goods which are replaced.
In gild to merits under the warranty granted nether clause 3 y'all must: (a) Retain this warranty with your receipt/proof of purchase; and (b) Return the Goods to u.s.a. at the relevant address beneath or to the Supplier by prepaid freight within the Warranty Period accompanied with (i) the legible and unmodified original proof of purchase, which clearly indicates the name and address of the Supplier, the appointment and place of buy, the product name or other product serial number and (ii) this warranty.
This warranty is immediately void if: (a) Any serial number or appliance plate is removed or defaced; (b) The Appurtenances accept been serviced or otherwise repaired by a person not authorised to do so by us or where non approved replaced parts are used.
The Goods are designed for domestic utilize merely. A limited 90-day Warranty applies to any industrial or commercial use of the Appurtenances. The Goods must be continued to the electrical voltage requirements every bit specified in the rating label located on the Goods.
This warranty does not embrace the cost of challenge nether the warranty or ship of the Goods to and from the Supplier or us.
This warranty is merely valid and enforceable in Australia against Spectrum Brands Australia Pty Ltd and in New Zealand against Spectrum Brands New Zealand Limited.

Contact us or the Supplier for further details.
Spectrum Brands Australia Pty Ltd
Locked Bag 3004
Braeside, VIC 3195
Australia
Customer service in Australia: 1800 623 118
Electronic mail: [email protected]
Website: www.remington-products.com.au
Spectrum Brands New Zealand Limited
PO Box 9817
Newmarket, Auckland 1149
New Zealand
Customer service in New Zealand: 0800 736 776
Email: [email protected]
Website: www.remington.co.nz

Money-Back Offer
Australia/New Zealand Only
If within 90 days you are not fully satisfied with your Remington® i-Low-cal®
Meaty Command, please call your local Remington Customer Service Centre:
Commonwealth of australia: 1800 623 118
New Zealand: 0800 736 776

Ezoic

REMINGTON SERVICE HOTLINE
Australia 1800 623 118 (price-free)
New Zealand 0800 736 776 (cost-free)
AUTHORISED REPAIR CENTRES
Visit www.remington-products.com.au for authorised repair centre details.
Remington® and i-Calorie-free® are registered trademarks of Spectrum Brands, Inc.,
or one of its subsidiaries.
Made in Israel to the specifications of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc
Rev: 06/18
Office No. T22-0005625
Blazon: IPL30A

Documents / Resource

References